Upper and Lower Valve Bodies Disassemble
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Upper and Lower Valve Bodies Disassemble
| Callout | Component Name |
|---|---|
| 1 | Control Valve Upper Body Bolt (Qty: 12) |
| 2 | Control Valve Lower Body Bolt (Qty: 5) |
| 3 | Control Valve Lower Body Bolt |
| 4 | Control Valve Lower Body Procedure Separate the upper and lower valve bodies by carefully prying at the point indicated. Refer to Control Valve Lower Body Assembly Cleaning and Inspection |
| 5 | Control Valve Body Spacer Plate
CAUTION:
Do not use the old spacer plate. Install a NEW spacer plate. Reusing an old spacer plate may cause internal transmission leaks and transmission damage.
|
| 6 | Control Valve Body Ball Check Valve (Qty: 8)
NOTE:
Note the position of the ball check valves.
|
| 7 | Control Valve Upper Body
NOTE:
For additional information regarding the control valve upper body assembly. Refer to Control Valve Upper Body Assembly Cleaning and Inspection
|