LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission - 6L80 (MYC) Or 6L90 (MYD) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Disassemble >> Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Manual Shaft Detent Assembly And Manual Shift Shaft Position Switch
GM1627573Courtesy of GENERAL MOTORS COMPANY
Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

Callout Component Name
1 Manual Shaft Detent Bolt
2 Manual Shaft Detent
3 Control Valve Upper Body Bolt
4 Automatic Transmission Manual Shift Shaft Position Switch
  1. Release the connector lock, indicated by the arrow, then disconnect the connector.
  2. Remove the switch assembly.
scientia non olet · About LEMON Manuals