LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission - 6L80 (MYC) Or 6L90 (MYD) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Disassemble >> Input and Output Speed Sensor Assembly Removal

Input and Output Speed Sensor Assembly Removal

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Input And Output Speed Sensor Assembly
GM1627571Courtesy of GENERAL MOTORS COMPANY
Input and Output Speed Sensor Assembly Removal

Callout Component Name
1 Automatic Transmission Input and Output Speed Sensor Bolt (Qty: 2)
2 Automatic Transmission Input and Output Speed Sensor

Procedure

  1. Release the connector lock, indicated by the arrow, then disconnect the connector.
  2. Remove the sensor assembly.
  3. Inspect the wiring harness clips and replace if damaged.
scientia non olet · About LEMON Manuals