Control Solenoid Valve Assembly Removal
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Control Solenoid Valve Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Control Solenoid Valve Heat Sink Bolt (Qty: 2) |
| 2 | Control Valve Lower Body Bolt (Qty: 4) |
| 3 | Control Valve Lower Body Bolt (Qty: 5) |
| 4 | Control Solenoid Valve
CAUTION:
Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result.
|
| 5 | Control Solenoid Valve Filter Plate
CAUTION:
Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination.
CAUTION:
Discard the filter plate. Replace with a NEW filter plate. Reusing an old filter plate may cause damage to the control solenoid valve assembly.
|