Control Solenoid Valve Assembly Contact Gap Inspection
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Control Solenoid Valve Assembly Contact Gap Inspection
| Callout | Component Name |
|---|---|
| 1 | Control Solenoid Valve
NOTE:
Inspect the contact area between the "heat sink" area of the control solenoid valve assembly and the valve body. There should be no visible gap. If a gap exists, loosen all 18 bolts and retighten in the required sequence.
|