1 - 2 - 3 - 4 Clutch Piston Removal

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 1-2-3-4 Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	1 - 2 - 3 - 4 Clutch Piston Dam Retaining Ring CAUTION: Use care when compressing the 1 - 2 - 3 - 4 clutch spring and dam assembly. Compressing the dam assembly too much may damage it. CAUTION: Refer to Retaining Ring Reuse Caution . Special Tool DT 38734 Intermediate Spring Compressor Adapter For equivalent regional tools, refer to Special Tools .
2	1 - 2 - 3 - 4 Clutch Piston Dam Assembly
3	1 - 2 - 3 - 4 Clutch Spring
4	1 - 2 - 3 - 4 Clutch Piston Procedure Inspect the 1 - 2 - 3 - 4 clutch piston for cracking and replace if damaged. NOTE: It may be necessary to apply air to the apply passage in order to remove the piston. Install the 1 - 2 - 3 - 4 clutch housing onto the torque converter (with fluid pump) housing assembly in order to apply air. After air is applied, it may be necessary to turn the housing assembly upside down and carefully tap the housing against a flat surface in order to release the piston.