Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
P0716
- DTC P0101, P0102, P0103, P0121, P0122, P0716, P07BF, or P07C0 = Not set
- Accelerator Pedal Position Signal from Engine Control Module = Greater than 5%
- Battery Voltage = Greater than 9 V
- Engine Torque = Greater than 30 N.m (22 lb ft)
- Transmission ISS = Greater than 170 RPM
- Transmission OSS = Greater than 214 RPM
Frequency the DTC runs = Continuously - After the running conditions are met
P0717
- DTC P0101, P0102, P0103, P0716, P0722, P0723, P077C, P0770, P07BF or P07C0 = Not set
- Accelerator Pedal Position Signal from Engine Control Module = Greater than 5%
- Battery Voltage = Greater than 9 V
- Engine Torque = Greater than 30 N.m (22 lb ft)
- Transmission OSS = Greater than 68 RPM - Gear 1, 2, 3, 4, 5
- Transmission OSS = Greater than 214 RPM - Gear 6, 7, 8
Frequency the DTC runs = Continuously - After the running conditions are met
P07BF, P07C0
- {P07BF} DTC P07C0 = Not pending
- {P07C0} DTC P07BF = Not pending
- Battery Voltage = 11 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met