LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Mechanical - 6.0L (L96)) >> Repair Instructions - On Vehicle >> Oil Pump, Screen, And Crankshaft Oil Deflector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Pump Screen Bolt & Nuts
    GM647800Courtesy of GENERAL MOTORS COMPANY
  1. Remove the oil pan. Refer to Oil Pan Replacement .
  2. Remove the engine front cover. Refer to Engine Front Cover Replacement .
  3. Remove the oil pump screen bolt and nuts.
  4. Remove the oil pump screen with O-ring seal.
  5. Remove the O-ring seal from the pump screen.
  6. Discard the O-ring seal.
    7. Fig 2: Crankshaft Oil Deflector And Nuts
    GM683798Courtesy of GENERAL MOTORS COMPANY
  7. Remove the remaining crankshaft oil deflector nuts.
  8. Remove the crankshaft oil deflector.
    9. Fig 3: Oil Pump And Bolts
    GM3277861Courtesy of GENERAL MOTORS COMPANY
  9. Remove the oil pump bolts (1).
    10. NOTE:

    Do not allow dirt or debris to enter the oil pump assembly, cap end as necessary.

  10. Remove the oil pump (2)
scientia non olet · About LEMON Manuals