LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Mechanical - 6.0L (L96)) >> Repair Instructions - On Vehicle >> Drive Belt Replacement - Accessory >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  2. Install a breaker bar with hex-head socket to the drive belt tensioner bolt.
  3. Rotate the drive belt tensioner clockwise in order to relieve tension on the belt.
    4. Fig 1: Drive Belt
    GM833370Courtesy of GENERAL MOTORS COMPANY
  4. Remove the drive belt (1) from the pulleys and the drive belt tensioner.
  5. Slowly release the tension on the drive belt tensioner.
  6. Remove the breaker bar and socket and from the drive belt tensioner bolt.
  7. Clean and inspect the belt surfaces of all the pulleys.
scientia non olet · About LEMON Manuals