Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Route the drive belt (1) around all the pulleys except the idler pulley.
- Install the breaker bar with hex-head socket to the belt tensioner bolt.
- Rotate the belt tensioner clockwise in order to relieve the tension on the tensioner.
- Install the drive belt under the idler pulley.
- Slowly release the tension on the belt tensioner.
- Remove the breaker bar and socket from the belt tensioner bolt.
- Inspect the drive belt for proper installation and alignment.
- Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
- Start the vehicle and inspect the drive belt for proper operation.