LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Mechanical - 6.0L (L96)) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement 
    2. Fig 1: Oil Pan-To-Rear Oil Seal Housing Bolts
    GM680413Courtesy of GENERAL MOTORS COMPANY
  2. Remove the oil pan-to-rear oil seal housing bolts (1).
    3. Fig 2: Rear Oil Seal Housing Components
    GM2100849Courtesy of GENERAL MOTORS COMPANY
  3. Remove the rear oil seal housing bolts (1).
  4. Remove the rear oil seal housing (2) and gasket (3). Discard the gasket.
  5. Remove and discard the rear oil seal (4).
scientia non olet · About LEMON Manuals