LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Mechanical - 6.0L (L96)) >> Repair Instructions - Off Vehicle >> Oil Pump, Screen And Crankshaft Oil Deflector Removal

Oil Pump, Screen And Crankshaft Oil Deflector Removal

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Pump Suction Pipe, O-Ring Seal, Bolt And Nuts
    GM2308314Courtesy of GENERAL MOTORS COMPANY
  1. Remove Oil Pump Suction Pipe Bolt (2) and Oil Pump Suction Pipe Nut (3).
  2. Remove Oil Pump Suction Pipe (4) with O-ring seal (1).
  3. Remove and DISCARD the O-ring seal.
    4. Fig 2: Crankshaft Oil Deflector And Nut
    GM260099Courtesy of GENERAL MOTORS COMPANY
  4. Remove Crankshaft Oil Deflector Nut
  5. Remove Crankshaft Oil Deflector
    6. Fig 3: Oil Pump And Bolts
    GM1658173Courtesy of GENERAL MOTORS COMPANY
  6. Remove Oil Pump Bolts (411).
    7. NOTE:

    Do not allow dirt or debris to enter the oil pump assembly. Cap ends, as necessary.

  7. Remove Oil Pump (413).
scientia non olet · About LEMON Manuals