LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Mechanical - 6.0L (L96)) >> Repair Instructions - Off Vehicle >> Engine Block Cleaning And Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the following components:
    • Cylinder walls for excessive scratches, gouging, or ring ridge
    • Cylinder bores for excessive ring ridge at the top of the cylinder
    • Coolant jacket for cracks
    • Valve lifter bores for excessive scoring or wear
    • Crankshaft bearing webs for cracks
    • Gasket sealing surfaces for excessive scratches or gouging

      Refer to Replacing Engine Gaskets .

    • Oil galleries for restrictions
    • Threaded bolt holes for damaged threads
    • Cylinder bores for excessive ring ridge at the top of the cylinder
  2. Measure the cylinder bores for an oversize condition:
scientia non olet · About LEMON Manuals