Noise In First Or Reverse Gear
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
| Checks |
Causes |
| Center Support with 2 - 6 Low and Reverse Clutch Assembly (67) |
- Inspect for damaged or worn low and reverse clutch plates (463 - 465).
- Inspect for damaged low and reverse clutch backing plate (462). Inspect for worn splines on backing plate.
- Inspect for damaged low and reverse clutch backing plate retaining ring (461).
- Inspect for damaged low and reverse clutch piston assembly (470), spring (469), spring retaining ring (466), and center support assembly (459).
- Inspect for damaged low clutch sprag assembly (467). Holding the sprag assembly with the retaining ring facing up, and the inner race of the sprag assembly fixed, the outer race should freewheel counterclockwise.
- Inspect for cut, worn, or damaged low clutch sprag seal (468).
|
| Output Carrier Assembly (68) |
Inspect for damaged or stripped splines on the output carrier assembly. |