Circuit/System Description

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

The pressure control solenoid 4 is part of the control solenoid valve assembly which has no serviceable parts. The normally low pressure control solenoid 4 regulates and directs oil pressure to the 2-6 clutch regulator valve. Increasing pressure control solenoid 4 pressure increases pressure to the 2-6 clutch regulator valve. The Transmission Control Module varies the current to the pressure control solenoid 4 through a low side driver. Increasing the current to pressure control solenoid 4 increases oil pressure by closing OFF the solenoid exhaust port. Decreasing the current to pressure control solenoid 4 decreases oil pressure by opening the exhaust port. Pressure control solenoid 4 power is supplied by the Transmission Control Module through a high side driver. The high side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected the high side driver will reset.