Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
P182E
- DTCs: P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0716, P0717, P0722, P0723, P07C0, P07BF, P077C or P077D is not set.
- The engine speed is between 400 - 7, 500 RPM.
- The ignition voltage is between 8.6 - 32 V.
- Engine torque signal is valid.
P1915
- DTC P0722 or P0723 is not set.
- The transmission output shaft speed is less than 90 RPM.
- The ignition voltage is between 8.6 - 32 V.