Conditions for Running the DTC

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
Ignition voltage is between 8.6 - 32 V.
The engine speed is between 400 - 7, 500 RPM for 5 s.
The internal mode switch range is not PARK, NEUTRAL or REVERSE.
High Side Driver is enabled.
The transmission fluid temperature is -6.6 to +130°C (+20 to +266°F).
Accelerator pedal position signal is valid.
The throttle position signal is valid.
The output shaft speed is 0 RPM or greater.
The TCM must receive a valid torque signal from the ECM.