Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
P0716
- DTC P0101, P0102, P0103, P0121, P0122, P0123, P0717, P0752, P0753, or P0974 is not set.
- The engine speed is 400 - 7, 500 RPM or greater for 5 s.
- The engine torque signal is valid.
- Engine torque is between 0 N.m (0 lb ft) and 8191.88 N.m (6042.01 lb ft).
- Ignition voltage is between 9 - 17.5 V.
- The vehicle speed is greater than 10 km/h (6.21 mph).
- The throttle position signal must be valid.
P0717
- DTC P0101, P0102, P0103, P0722 or P0723 is not set.
- The engine speed is 400 - 7, 500 RPM or greater for 5 s.
- Ignition voltage is between 9 - 17.5 V.
- The engine torque signal is valid.
- The vehicle speed is greater than 16 km/h (10 mph).
- The engine torque is between 50 N.m (37 lb ft) and 8191.88 N.m (6042.01 lb ft).