Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
P0711
- DTCs: P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0716, P0712, P0713, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
- Ignition voltage is between 8.6 - 32 V.
- The engine speed is 400 - 7, 500 RPM or greater for 5 s.
- The vehicle speed is 8 km/h (5 mph) or greater for 5 min.
- The accelerator pedal position signal is valid.
- The engine torque signal is valid.
P0712
- DTC P0712, P0716, P0717, P0722, or P0723 is not set.
- The engine speed is greater than 400 - 7, 500 RPM for 5 s.
- Ignition voltage is between 8.6 - 32 V.
P0713
- DTC P0713, P0716, P0717, P0722, or P0723 is not set.
- The engine speed is greater than 400 - 7, 500 RPM for 5 s.
- Ignition voltage is between 8.6 - 32 V.