Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
P06AC
- DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0716, P0712, P0713, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
- Engine speed is between 400 - 7, 500 RPM for 5 s.
- Ignition voltage is between 8.6 - 32 V.
- Brake torque is not active.
- Engine speed is valid.
- Throttle position is valid.
- Transmission input speed sensor signal is 200 RPM or less.
- Engine throttle position signal is 30 percent or greater.
- Vehicle speed is 8 km/h (5 mph) or less.
P06AD
- DTC P06AD, P0716, P0717, P0722 or P0723 is not set.
- Engine speed is between 400 - 7, 500 RPM for 5 s.
- Ignition voltage is between 8.6 - 32 V.
P06AE
- DTC P06AE is not set.
- Engine speed is 400 RPM or greater for 5 s.
- Ignition voltage is between 8.6 - 32 V.