Conditions for Setting the DTC
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
C0392 08
- The transfer case control module detects a transfer case range position sensor voltage that does not constantly change, but remains low, <0.25 V, indicating a short to ground.
Or
- The transfer case control module detects a gear position sensor voltage that does not constantly change, but remains high, >6.0 V, indicating a short to voltage.
C0392 28
The transfer case control module does not receive a sensor reference voltage 1 circuit, also known as the 5V reference 1 circuit, of 4.8 - 5.2 volts.
P0642
The transfer case control module detects less than 4.8 V on the transfer case reference voltage 1 circuit, also known as the 5V reference 1 circuit.
P0643
The transfer case control module detects greater than 5.2 V on the transfer case sensor reference voltage 1 circuit, also known as the 5V reference 1 circuit.