2013 Input Shaft Seal Installer Revisions
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Beginning July 2013, a NEW input shaft seal installer has been identified for Magna transfer case applications (all model years and all RPOs). The new seal installer is identified as DT-50648-A Seal Installer (4). The DT-50648-A Seal Installer is to be used in place of J-42738 Seal Installer (3), as well as J-36183 Press Tube (1) and J-36184 Press Tube Reducer (2). J-42738 Seal Installer is to be discontinued and no longer available.