Clutch Backing Plate Retaining Ring Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
2-3-4-6-8 Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 1.54 - 2.20 mm (0.061 - 0.087 in) | ||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.75 - 1.85 mm | 0.069 - 0.073 in | Light Green |
| 2.11 - 2.21 mm | 0.083 - 0.087 in | No Color |
| 2.46 - 2.56 mm | 0.097 - 0.101 in | Yellow |
| 2.82 - 2.92 mm | 0.111 - 0.115 in | Light Blue |
| 3.18 - 3.28 mm | 0.125 - 0.129 in | Orange |
| 3.54 - 3.64 mm | 0.139 - 0.143 in | Dark Green |
| 3.89 - 3.99 mm | 0.153 - 0.157 in | Silver |
4-5-6-7-8 Reverse Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 1.24 - 1.90 mm (0.049 - 0.075 in) | ||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.75 - 1.85 mm | 0.069 - 0.073 in | Light Green |
| 2.11 - 2.21 mm | 0.083 - 0.087 in | No Color |
| 2.46 - 2.56 mm | 0.097 - 0.101 in | Yellow |
| 2.82 - 2.92 mm | 0.111 - 0.115 in | Light Blue |
| 3.18 - 3.28 mm | 0.125 - 0.129 in | Orange |
| 3.54 - 3.64 mm | 0.139 - 0.143 in | Dark Green |
| 3.89 - 3.99 mm | 0.153 - 0.157 in | Silver |
1-3-5-6-7 Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 4 Plates - 1.82 - 2.30 mm (0.072 - 0.091 in) Clutch Pack Travel Specification - 5 Plates - 1.50 - 2.10 mm (0.059 - 0.083 in) |
||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 2.45 - 2.55 mm | 0.096 - 0.100 in | Light Green |
| 2.79 - 2.89 mm | 0.110 - 0.114 in | Silver |
| 3.13 - 3.23 mm | 0.123 - 0.127 in | Yellow |
| 3.47 - 3.57 mm | 0.137 - 0.141 in | Light Blue |
| 3.81 - 3.91 mm | 0.150 - 0.154 in | Orange |
1-2-3-4-5 Reverse Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 0.93 - 1.82 mm (0.037 - 0.072 in) | ||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.91 - 2.01 mm | 0.075 - 0.079 in | Light Blue |
| 2.25 - 2.35 mm | 0.089 - 0.093 in | Orange |
| 2.59 - 2.69 mm | 0.102 - 0.106 in | Dark Green |
| 2.92 - 3.02 mm | 0.115 - 0.119 in | Yellow |
| 3.26 - 3.36 mm | 0.128 - 0.132 in | Purple |