Fuel Pressure Leaks Down
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Open the both valves on the CH-37287-1A Fuel Pressure Gauge Adapter.
- Ignition ON, command the Fuel Pump Enable ON with a scan tool.
- Close the valve between the gauge and fuel tank on the CH-37287-1A Fuel Pressure Gauge Adapter.
- Verify that the Fuel Rail Fuel Pressure parameter does not decrease greater than 34 kPa (5 psi) in 1 minute.
- If the fuel pressure drops
Locate and replace the leaking Q17 Fuel Injector.
- Go to next step: If the fuel pressure does not drop
- If the fuel pressure drops
- Test or replace the G12 Fuel Pump.