Component Testing
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
You must perform the Circuit/System Testing before proceeding with Component Testing.
- Ignition OFF, connect the EL 26792 HEI Spark Tester to the appropriate T8 Ignition Coil.
- Engine Running.
- Verify the spark output of the T8 Ignition Coil.
- If no output or the output is weak
Replace the T8 Ignition Coil
- Go to next step: If the output is good
- If no output or the output is weak
- All OK.