Conditions for Running the DTC

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0016, P0030, P0036, P0050, P0053, P0054, P0056, P0059, P0060, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0131-P0135, P0137, P0138, P013A, P013B, P013C, P013D, P013E, P013F, P0140, P0141, P014A, P014B, P0151-P0155, P0157, P0158, P015A, P015B, P015C, P015D, P0160, P0161, P0178, P0179, P0201-P0208, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277, P0279, P0280, P0282, P0283, P0300-P0308, P0340, P0341, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0458, P0459, P0496, P0498, P0499, P219A, P219B, P2227, P2228, P2229, P2230, P2269, P2270, P2271, P2272 or P2273 is not set.
The barometric pressure is greater than 70 kPa (10.2 PSI).
The manifold absolute pressure is between 10-250 kPa (1.5-36 PSI).
The intake air temperature is between -20°C and +150°C (-4 and +302°F).
The start up engine coolant temperature is warmer than -20°C (-4°F).
The fuel control intrusive diagnostics are not active.
The engine is operating under light acceleration, heavy acceleration or cruise conditions.
DTCs P2096, P2097, P2098 and P2099 run continuously when the conditions above have been met.