Alcohol in Fuel Testing with Special Tool, If Available
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Test the fuel composition using CH 44175-A Alcohol Tester Kit and Instruction Manual.
- Verify no water appears in the fuel sample.
- If water appears in the fuel sample
Clean the fuel system.
- Go to next step: If no water appears in the fuel sample
- If water appears in the fuel sample
- Subtract 50 from the reading on the DMM in order to obtain the percentage of alcohol in the fuel sample.
- Verify the non-blended gasoline fuel sample does not measure greater than 15% or an E85 blended gasoline fuel sample measures greater than 91% ethanol.
- If greater than the specified value
- Add fresh regular gasoline to the vehicle's fuel tank.
- Remove a new sample of fuel from the tank.
- Test the fuel composition using CH 44175-A Alcohol Tester Kit and Instruction Manual.
- Subtract 50 from the reading on the DMM in order to obtain the percentage of alcohol in the fuel sample.
- Verify the non-blended gasoline fuel sample does not measure greater than 15% or an E85 blended gasoline fuel sample measures greater than 91% ethanol.
- If additional testing indicates that the ethanol percentage is still above 15% for a non-blended gasoline sample, drain and replace the vehicle's fuel. Refer to Fuel Tank Draining .
- If additional testing indicates that the E85 blended gasoline sample still measures above 91%, continue adding fresh, regular gasoline until the ethanol content is 85% or less.
- Go to next step: If the specified value or less
- All OK.