LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Antilock Brake System) >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Brake Dust Warning
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  2. Disconnect Wheel Speed Sensor Electrical Connector
  3. Release Wheel Speed Sensor Harness Clip (1)
    Fig 1: Wheel Speed Sensor Harness Clips
    GM4138377Courtesy of GENERAL MOTORS COMPANY
  4. Release Wheel Speed Sensor Harness Clip (2)
  5. Release Wheel Speed Sensor Harness Clip (1)
    Fig 2: Wheel Speed Sensor Harness Clip
    GM4138379Courtesy of GENERAL MOTORS COMPANY
  6. Release Wheel Speed Sensor Harness Clip (1)
    Fig 3: Wheel Speed Sensor Harness Clip
    GM4138381Courtesy of GENERAL MOTORS COMPANY
  7. Remove Wheel Speed Sensor Bolt (1)
    Fig 4: Wheel Speed Sensor Bolt
    GM4138382Courtesy of GENERAL MOTORS COMPANY
  8. Remove Wheel Speed Sensor (1)
    Fig 5: Wheel Speed Sensor
    GM4138384Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals