LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Antilock Brake System) >> Diagnostic Information And Procedures >> DTC C0110: Pump Motor >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the ABS pump motor turns On and Off when commanding the ABS Pump Motor On and Off with a scan tool.
    • If the pump motor does not turn On and Off 

      Refer to Circuit/System Testing below.

    • Go to next step: If the pump motor turns On and Off 
  3. All OK.