Conditions for Setting the DTC
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
C0035 04, C0040 04, C0045 04 or C0050 04
- A open or high resistance is detected on the wheel speed sensor ignition circuit.
- A open or high resistance is detected on the wheel speed sensor signal circuit.
C0035 05, C0040 05, C0045 05 or C0050 05
- A short to ground or a short to voltage is detected on the wheel speed sensor ignition circuit.
- A short to ground or a short to voltage is detected on the wheel speed sensor signal circuit.
C0035 08, C0040 08, C0045 08 or C0050 08
- A high resistance is detected in the wiring harness.
- A short to voltage is detected on the high side wheel speed sensor circuit.
C0035 18, C0040 18, C0045 18 or C0050 18
- The tone ring may be demagnetized.
- Incorrectly mounted wheel speed sensor.
- An erratic wheel speed sensor signal is detected.
- Air gap between the wheel speed sensor and the tone ring is too large.
C0035 0F, C0040 0F, C0045 0F or C0050 0F
- Incorrectly mounted wheel speed sensor.
- Debris on the wheel speed sensor or the tone ring.
- Missing tooth or teeth on the wheel speed sensor tone ring.
- Electrical magnetic interference with the wheel speed sensor harness.
C0035 3A, C0040 3A, C0045 3A or C0050 3A
- The wrong hub or tone ring may be installed.
- A incompatible wheel speed sensor may be installed.