Underhood Electrical Center Or Junction Block Bracket Replacement

Fig 1: Underhood Electrical Center/Junction Block Bracket And Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the underhood electrical center junction block. Refer to Underhood Electrical Center or Junction Block Replacement .
1	Underhood Electrical Center Junction Block Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten  9 N.m (80 lb in)
2	Underhood Electrical Center Junction Block Procedure  Unclip and reposition wiring harnesses and connectors from the junction block bracket as necessary.