Driver Or Passenger Seat Adjuster Finish Cover Replacement

Fig 1: Driver or Passenger Seat Adjuster Finish Cover

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster rear finish cover. Refer to Front Seat Adjuster Rear Finish Cover Replacement .
1	Driver or Passenger Seat Adjuster Finish Cover CAUTION: Do not twist the cover during removal. Twisting the cover may cause the component to break. Procedure Adjust the seat to the full rearward position to gain access to the finish cover. Firmly grasp the adjuster front finish cover and side cover, pulling forward to disengage it from the seat track. Firmly grasp the adjuster finish cover, pulling forward to disengage it from the seat track. Make sure the front cap and side cover are not separated and heat stakes are not broken.

Callout

Component Name

Preliminary Procedure

Remove the front seat adjuster rear finish cover. Refer to Front Seat Adjuster Rear Finish Cover Replacement .

Driver or Passenger Seat Adjuster Finish Cover

CAUTION:

Do not twist the cover during removal. Twisting the cover may cause the component to break.

Procedure

Adjust the seat to the full rearward position to gain access to the finish cover.
Firmly grasp the adjuster front finish cover and side cover, pulling forward to disengage it from the seat track.
Firmly grasp the adjuster finish cover, pulling forward to disengage it from the seat track.
Make sure the front cap and side cover are not separated and heat stakes are not broken.