Liftgate Trim Finish Panel Replacement

Fig 1: Liftgate Trim Finish Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Liftgate Upper Trim Finish Panel. Refer to Liftgate Upper Trim Finish Panel Replacement
1	Liftgate Lower Trim Finish Panel Fastener CAUTION: Refer to Fastener Caution . NOTE: Liftgate window must be in the open position to avoid damage to the trim finish panel. Tighten 9 N.m (80 lb in)
2	Liftgate Trim Finish Panel Assembly Procedure Use a trim panel removal tool to aid in the removal of the trim panel from the liftgate assembly. Lift the liftgate trim finish panel out and over the liftgate window upper garnish molding retainers. Disconnect the electrical connector, if equipped.

Callout

Component Name

Preliminary Procedure
Remove Liftgate Upper Trim Finish Panel. Refer to Liftgate Upper Trim Finish Panel Replacement

Liftgate Lower Trim Finish Panel Fastener

CAUTION:

NOTE:

Liftgate window must be in the open position to avoid damage to the trim finish panel.

Tighten
9 N.m (80 lb in)

Liftgate Trim Finish Panel Assembly

Procedure

Use a trim panel removal tool to aid in the removal of the trim panel from the liftgate assembly.
Lift the liftgate trim finish panel out and over the liftgate window upper garnish molding retainers.
Disconnect the electrical connector, if equipped.