LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Center Pillar Upper Trim Panel Replacement

Center Pillar Upper Trim Panel Replacement

Fig 1: Center Pillar Upper Trim Panel Assembly
GM3267752Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  3. Remove the front seat belt anchor plate tensioner fastener. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
  4. Move the seat to the full forward position.
1 Center Pillar Upper Assist Handle Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Procedure 
Use a small flat bladed tool to open the assist handle covers to access the fasteners.
Tighten 
9 N.m (80 lb in)
2 Center Pillar Upper Trim Panel Assembly
Procedure 
When replacing the center pillar upper trim panel, feed the seat belt through the panel.