Instrument Panel Accessory Center Trim Plate Replacement (Chevrolet/GMC)

Fig 1: Instrument Panel Accessory Center Trim Plate (Chevrolet/GMC)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel upper trim cover. Refer to Instrument Panel Upper Trim Cover Replacement (Chevrolet/GMC) . Remove the instrument panel lower trim panel. Refer to Instrument Panel Lower Trim Panel Replacement (Chevrolet/GMC) . Remove the instrument panel center trim pad. Refer to Instrument Panel Center Trim Pad Replacement (Chevrolet/GMC) .
1	Instrument Panel Accessory Trim Center Plate Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Accessory Center Trim Plate Procedures Use a flat bladed plastic trim tool in order to release the retainer clips securing the trim plate to the instrument panel carrier. Disconnect the electrical connector. Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Instrument Panel Accessory Trim Center Plate Bolt (Qty: 2)

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Panel Accessory Center Trim Plate

Procedures

Use a flat bladed plastic trim tool in order to release the retainer clips securing the trim plate to the instrument panel carrier.
Disconnect the electrical connector.
Transfer components as necessary.