LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CTS V >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Manual Shift Shaft and Seal Replacement >> Installation Procedure

Installation Procedure

  1. GM3817501Courtesy of GENERAL MOTORS COMPANY

    Install the NEW manual shift shaft seal (1) using DT-47770  seal installer.

  2. GM3817211Courtesy of GENERAL MOTORS COMPANY

    Install the manual shift shaft (2) aligning the position switch assembly onto the shaft.

  3. Install the NEW manual shift shaft pin (1).
  4. Install the NEW manual shift shaft detent lever hub pin (3).
  5. Raise and install the transmission. Transmission Replacement (M5U with LT4) Transmission Replacement (M5N with LGX) Transmission Replacement (M5N with LTG) 
  6. Install the control valve body. Control Valve Body Replacement (M5N) Control Valve Body Replacement 
  7. Install the automatic transmission range selector lever. Automatic Transmission Range Selector Lever Replacement (M5N) Automatic Transmission Range Selector Lever Replacement (M5U) 
  8. Reprogram the transmission. Solenoid Valve Characterization Reprogramming
scientia non olet · About LEMON Manuals