LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CTS Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Pipe Replacement >> Installation Procedure

Installation Procedure

  1. GM2815773Courtesy of GENERAL MOTORS COMPANY

    Install the evaporative emission canister purge pipe (3) to the EVAP emission canister. Refer to Plastic Collar Quick Connect Fitting Service .

  2. Install the evaporative emission canister purge pipe (3) to the retainers (2).
  3. Install NEW tie straps (1) to attach the evaporative emission canister purge pipe to the fuel tank filler pipe.
  4. Install the right rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement .
  5. GM2815762Courtesy of GENERAL MOTORS COMPANY

    Connect the evaporative emission canister purge pipe (1) to the fuel tank vent valve hose. Refer to Plastic Collar Quick Connect Fitting Service .

  6. Lower the vehicle.
scientia non olet · About LEMON Manuals