LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CTS Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Charge Air Cooler Inlet Air Tube Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Loosen the clamp and disconnect the charge air cooler inlet air tube from the inlet air hose.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (CTS) .
  4. Remove the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (AWD)Front Compartment Lower Noise Shield Replacement (RWD) .
  5. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (CTS) .
  6. GM2873830Courtesy of GENERAL MOTORS COMPANY

    Remove the charge air cooler inlet air tube bolts (1) from the charge air cooler inlet air tube (2).

  7. Lower the vehicle.
  8. Remove the charge air cooler inlet air tube from the turbocharger.
  9. GM2873828Courtesy of GENERAL MOTORS COMPANY

    Pull the release clip (1) outward and disconnect the charge air cooler inlet air tube (2) from the charge air cooler.

  10. Remove the charge air cooler inlet air tube (2) from the vehicle.
scientia non olet · About LEMON Manuals