Instrument Panel Trim Plate Applique Replacement - Right Side

Callout	Component Name
Preliminary Procedure Instrument Panel Outer Trim Cover Replacement
1	Instrument Panel Molding Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Trim Plate Applique - Right Side Procedure Open the instrument panel compartment door to access the lower edge of the trim plate applique. Use a flat bladed plastic trim tool. Transfer components as necessary.

Callout

Component Name

Instrument Panel Molding Bolt [2x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Panel Trim Plate Applique - Right Side

Procedure

Open the instrument panel compartment door to access the lower edge of the trim plate applique.
Use a flat bladed plastic trim tool.
Transfer components as necessary.