LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement - Bank 1 (LFX) >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to Intake Manifold Replacement (LFX) .
    2. Fig 1: Engine Wiring Harness Ignition Coil Electrical Connectors - Bank 1 (LFX)
    GM2754747Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).
    3. Fig 2: Ignition Coil & Bolts - Bank 1
    GM2754749Courtesy of GENERAL MOTORS COMPANY
  3. Remove the ignition coil bolt(s) (1).
  4. Remove the ignition coil(s) (2).
scientia non olet · About LEMON Manuals