LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Charge Air Bypass Valve Vacuum Tank Tube Replacement (Bundle Front Section LF3) >> Removal Procedure

Removal Procedure

  1. Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LF3) .
    3. Fig 1: Charge Air Bypass Valve Vacuum Tank Tube Bundle Front Section
    GM3290819Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the charge air bypass valve vacuum tank tube bundle front section (1) from charge air bypass valve vacuum tank tube bundle rear section. Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Charge Air Bypass Valve Vacuum Tank Tube Bundle Front Section Quick Connect Fitting
    GM3290814Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the charge air bypass valve vacuum tank tube bundle front section clamps (1) from turbocharger wastegate actuator vacuum tank.
  5. Disconnect the charge air bypass valve vacuum tank tube bundle front section quick connect fitting (2) from turbocharger wastegate actuator vacuum tank. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Disconnect the retainers and tie straps from charge air bypass valve vacuum tank tube bundle front section (3) and remove from vehicle.
scientia non olet · About LEMON Manuals