LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Livery >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Belt Anchor Plate Tensioner Cover Replacement

Front Seat Belt Anchor Plate Tensioner Cover Replacement

Fig 1: Front Seat Belt Anchor Plate Tensioner Cover
GM2756073Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Front Seat Belt Anchor Plate Tensioner Cover

Procedure

  1. Raise the seat to the highest seat position.
  2. Unclip the seat tensioner wiring harness from the cover.
  3. Release the rear tabs of the cover.
  4. Slide the finish cover forward off the tensioner rod.
scientia non olet · About LEMON Manuals