Driver or Passenger Seat Cushion Outer Finish Panel Replacement

Preliminary Procedure

1. Remove the front seat recliner knob. Refer to Front Seat Recliner Knob Replacement .
2. Remove the driver or passenger seat lumbar support actuator knob. Refer to Driver or Passenger Seat Lumbar Support Actuator Knob Replacement .
3. Remove the front seat adjuster knob. Refer to Front Seat Adjuster Knob Replacement Front Seat Adjuster Knob Replacement (Rotary Knob with AQJ) .
4. Remove the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement .
5. Remove the seat belt from the seat belt tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .

Procedure

1. Pull back the toe kick cover to gain access to the rear fastener.
2. Pull upward to disengage the hooks on the outer finish panel from the seat.
3. Disconnect the electrical connectors.
4. If replacing the finish panel, transfer components as necessary.