Driver or Passenger Seat Head Restraint Speaker Replacement

Fig 1: Seat Head Restraint Speaker, Cover & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Driver or Passenger Seat Head Restraint Speaker Cover NOTE: Insert a pick into the speaker hole at the front of grill towards the center of the seat. Pry up grill at the front then move towards the outboard side of the grill. Use a small prying object under the pick so not to damage the speaker bezel.
2	Driver or Passenger Seat Head Restraint Speaker Fasteners (Qty: 2) CAUTION: Refer to Fastener Caution .
3	Driver or Passenger Seat Head Restraint Speaker Assembly Procedure Disconnect the electrical connector.