LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T70 (M7U M7W), 6T75 (M7V), Or 6T80 (Mhm) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Mount Replacement - Left Side >> Removal Procedure

Removal Procedure

  1. Remove the range selector lever cable bracket. Range Selector Lever Cable Bracket Replacement 
    2. Fig 1: Left Transmission Mount To Transmission Bolts
    GM2068583Courtesy of GENERAL MOTORS COMPANY
  2. Remove the transmission mount to transmission fasteners (1). DISCARD the bolts.
    3. Fig 2: Left Transmission Mount
    GM3232305Courtesy of GENERAL MOTORS COMPANY
  3. If applicable, disengage the wiring harness from the frame rail fastener stud.
    4. NOTE:

    Some vehicles may be equipped without a stud fastener.

  4. Remove the transmission mount to frame rail fasteners (1).
  5. Remove the left transmission mount (2).
scientia non olet · About LEMON Manuals