LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T70 (M7U M7W), 6T75 (M7V), Or 6T80 (Mhm) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> 3-5-Reverse and 4-5-6 Clutch Housing Disassemble >> Reluctor Wheel and Piston Removal

Reluctor Wheel and Piston Removal

Fig 1: Reluctor Wheel And Piston
GM1737916Courtesy of GENERAL MOTORS COMPANY
Reluctor Wheel and Piston Removal

Callout Component Name
1 A/Trans Input Shaft Speed Sensor Reluctor Ring Retaining Ring
CAUTION:

Compress the reluctor wheel just enough to clear the retainer. Over compressing the reluctor wheel will break the alignment tab and the clutch housing.


Special Tools 
DT-47694  Piston Spring Compressor
For equivalent regional tools, refer to Special Tools .
2 A/Trans Input Shaft Speed Sensor Reluctor Wheel
3 3 - 5 Reverse Clutch Piston
NOTE:

Inspect piston seals for damage and/or wear. Piston is reusable.

4 3 - 5 Reverse Clutch Spring Assembly
5 3 - 5 Reverse Clutch Piston Inner Seal (Orange)
6 3 - 5 Reverse Clutch Piston Inner Seal (Black)
7 3 - 5 Reverse Clutch Piston Dam Seal