Conditions for Running the DTC

P0722

• DTC P0101, P0102, P0103, P0121, P0122, P0123, P0716, P0717, or P0723 is not set.
• Selected range is not PARK or NEUTRAL.
• Transmission input speed is 1, 000 RPM or greater.
• Engine speed is 3, 200 RPM or greater.
• Throttle position is 5 % or greater.
• Throttle position signal is valid.
• Engine torque is 35 N.m (26 lb ft) or greater.
• Engine torque signal is valid.
• Transmission fluid temperature is -40°C (-40°F) or greater.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is greater than 8.5 V.

P0723

• DTC P0101, P0102, P0103, P0121, P0122, P0123, P0973, P0974, P0976, or P0977 is not set.
• Greater than 5 s since last transmission upshift or downshift.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is greater than 8.5 V.