Conditions for Running the DTC

P0716

• DTC P0101, P0102, P0103, P0121, P0122, P0123, P0717, P0752, P0973, or P0974 is not set.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is greater than 8.5 V.
• Engine torque signal is valid.
• Throttle position signal is valid.
• Vehicle speed is 10 km/h (6 mph) or greater.

P0717

• DTC P0101, P0102, P0103, P0722, or P0723 is not set.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is greater than 8.5 V.
• Vehicle speed is 16 km/h (10 mph) or greater.
• Engine torque is 50 N.m (37 lb ft) or greater.
• Engine torque signal is valid.