Conditions for Running the DTC

P06AC

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
• Engine speed is 400-7, 500 RPM for 5 s.
• Ignition voltage is between 8.6 - 32 V.
• Brake torque is not active.
• Engine torque signal is valid.
• Accelerator pedal position signal is valid.

P06AD

• DTC P0716, P0717, P0722, or P0723 is not set.
• Engine speed is 400-7, 500 RPM for 5 s.
• Ignition voltage is between 8.6 - 32 V.

P06AE

• Engine speed is 400-7, 500 RPM for 5 s.
• Ignition voltage is between 8.6 - 32 V.