Conditions for Running the DTC

P0667

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
• Brake torque is not active.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is between 8.6 - 32 V.
• Engine torque signal is valid.
• Accelerator pedal position signal is valid.

P0668

• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is between 8.6 - 32 V.

P0669

• DTC P0716, P0717, P0722, or P0723 is not set.
• Engine speed is 400 - 7, 500 RPM.
• Ignition voltage is between 8.6 - 32 V.